OBD Interface WiFi Device
IP: 192.168.0.11 - Subnet: 255.255.255.0 - Port: 35000 - Range: 50 ft - Antenna: Internal - Power Consumption: 0.75 Watts (With Power Switch) - Wifi Standard: 802.11a/b/g - Capable of communicating with vehicles which use the following protocols: - ISO 9141 - ISO 11898(aka. CAN) - ISO 14230(aka. KWP2000) - ISO 15765(aka. CAN) - SAE J1939 - Can detect and interpret these protocols automaticallyuse - Provides support for high speed communications and a low power sleep mode - Uses AT commands to communicate with a host device (PC notebook Iphone Ipod Touch" Ipad and so on) - You may have the following parameters read out from your vehicle: Vehicle Speed / RPM / Fuel Consumption / Engine Coolant Temp / Fuel Pressure / Calculated Engine Load / Throttle Position / Intake Manifold Pressure / Air Intake Temp / Timing Advance / Mass Air Flow / Fuel Level / Barometric Pressure / EVAP System Vapor Pressure / Fuel Trim - Cable length: 170cm - Comes with software CD ? "