Model: RF1100SE - Quantity: 1 - Color: Green - Material: PCB board - Working voltage: 1.8V~3.6V (Recommend 3.3V) - 433MHz band certification-free usage - Max. Working efficiency 500Kbps which support 2-FSK GFSK and MSK modulation - Modify baud rate with software better requirement for customers in different conditions of use - High baud rate faster data transfer rate - Low baud rate more strong anti-jamming and penetration ability the transmission distance further - High sensitivity (1.2 Kbps down-110 dBm 1% packet ber) - Built-in hardware CRC (inspection wrong and point-to-multipoint address control) - Lower consumption (RX 15.6 mA 2.4 Kbps which 433 MHz) - Can be programmed to control the output power for all the support frequency can reach +10 dBm - Waken wireless support low power electromagnetic wave activated and wake on lower consumption device - Before transmission channel access will be cleaned up automatically (CCA) named carrier protected reliably against detective system - Fast frequency changes brought the right frequency synthesizer jumping system - Module can be set address software software programming is very convenient - The standard DIP spacing interface easy to embedded applications - Separate 64 bytes RX and TX data FIFO - Open the actual transmission distances of up to 200 meters above (depending on the specific environment and - Great for DIY project