Quantity: 1 - Color: Black - Material: Circuit board - NRF24L01 is a universal ISM band monolithic transceiver chip works in the 2.4-2.5GHz - Wireless transceiver including: Frequency generator enhanced type SchockBurstTM mode controller power amplifier crystal amplifier modulator demodulator - The output power channel selection and protocol settings can be set extremely low current consumption through the SPI interface - As the transmit mode the transmit power is 6dBm the current is 9.0mA the accepted mode current is 12.3mA the current consumption of the power-down mode and standby mode are lower - Built-in 2.4GHz antenna supports up to six channels of data reception - Size: 15 x 29mm (including antenna) - Low operating voltage: 1.9-3.6V - 125 channels multi-point communication and frequency hopping to meet the communication needs - High Rate: 2Mbps as air transmission time is very short greatly reducing collision phenomena in wireless transmission (air transfer rate of software setting: 1Mbps or 2Mbps) - Low power consumption: When the answer mode communication fast air transmission and start-up time which greatly reduces the current consumption - Low application cost: NRF24L01 integrated part of all high-speed signal processing related to RF protocol such as: automatic retransmission of lost packets and automatically generate response signals etc. - NRF24L01 SPI interface: hardware SPI port MCU I/O ports - Internal FIFO compatible with a variety of microprocessor interface micro-controller is convenient - Standard pin Dip2.54MM spacing interface for embedded applications - Packing list: - 1 x NRF24L01 wireless transceiver module