Color: Black - Latest Firmware Version V1.39 - Support 2009 Models - Support Saab 9-5 and Saab 9-3 CAN - Covers almost all Opel cars from 1992 - 2008 even new cars with CAN-BUS baseddiagnostic such as Vectra-C Astra-H Zafira-B - OP-COM is a PC based Opel diagnostic program - This interface can read out and clear fault codes shows you live data lets you to perform output test and supports remote and key programming - The program supports many control units such as: - Engine - Automatic Transmission - ABS - Airbag - Engine Cooling module - Instrument Cluster - Electronic Climate Control - Body Control Unit - Since Opel uses many pin in the On-Board Diagnostic connector the diagnostic interface works as a multiplexer and selects the appropriate pin for communication - PIN3 PIN7PIN8PIN12 = Serial Link (ISO9141 KW81 KW82 KWP2000) - PIN6-PIN14 - PIN3-PIN11 - PIN1 - HSCAN - Dual-wire High Speed CAN-BUS 500 kbps - MSCAN - Dual-wire Medium Speed CAN-BUS 95 kbps - SWCAN - Single-wire Low Speed CAN-BUS 33.3 kbps - The diagnostic inteface is USB port based so there will be NO COMPATIBILITY ISSUES with serial to USB converters - The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems which is currently 500kbps. This is the main reason why only the USB port based interface is available for CAN-BUS - NOTE: The program can only be used with a special interface hardware. A simple serial or USB port based standard interfaces (K KKL etc) cannot be used - Comes with USB cable (140cm) and software CD CD: http://m5.img.dxcdn.com/CDDriver/CD/sku.114086.zip